Set Power Off Mode; Set Knife Option - NCR RealPOS 7199 User Manual

3-84 Service Level Troubleshooting

Set Power Off Mode

Set the Shift Time to Power Off using the configuration menu. If the printer is in
standby mode for the time that is defined by this setting, printer automatically power
off. Once enter power off mode, all LED are turned off. If feed key is pressed, printer
exit from power off mode and enter normal mode.
Caution: Be extremely careful in changing any of the printer settings to avoid
inadvertently changing other settings that might affect the performance of the printer.
Press the Paper Feed button for the Shift Time to Power Off you want.

Set Knife Option

Set the Knife option using the configuration menu. Answer No to the questions printed
on the receipt until you come to the instructions for knife option.
Caution: Be extremely careful in changing any of the printer settings to avoid
inadvertently changing other settings that might affect the performance of the printer.
Press the Paper Feed button for the option you want.