Xerox DocuPrint N2025 Service Manual page 358

Table 16 Plug/Jack (P/J) Connector Locations
Location (Note 1)
Coordinate
P/J s Location
Name PL
124 D-9 Tray 1 PL 4.2
125 E-9 Tray 1 PL 4.2
126 F-9 Tray 1 PL 4.2
127 G-26 Guide PL 3.1
CSTL
128 I-25 Not PL 3.1
mounted
131 B-10 Left _
Frame
Sub
Assembly
141 C-7 Sensor PL 8.1
Assembly
Print Car-
tridge
161 E-41 LVPS PL 9.2
Wiring Data
Base Engine
Harness (Note 2)
Harness Name Notes
(Note 3) Item #
P/H Unit Harness PL 4.2 Connects Tray 1
Assembly Assembly (Turn Clutch
Assembly) and P/H
Unit Harness Assem-
bly (Print Engine Con-
troller PWB).
P/H Unit Harness PL 4.2 Connects Tray 1
Assembly Assembly (Photo Sen-
sor) and P/H Harness
Assembly (Print
Engine Controller
PWB).
P/H Unit Harness PL 4.2 Connects Tray 1
Assembly Assembly (Photo Sen-
sor) and P/H Harness
Assembly (Print
Engine Controller
PWB).
NESNS Harness 21 Connects Tray 1 Guide
Assembly Left (Photo Sensor)
and P/H Harness
Assembly (Print
Engine Controller
PWB).
NESNS Harness PL 3.1 Connects NESNS
Assembly Harness Assembly
and P/H Harness
Assembly (Print
Engine Controller
PWB).
Feeder Harness PL 9.1 Connects Feeder 2
Assembly and Print Engine Con-
troller PWB.
Toner Sensor Har- PL 8.1 Connects Toner Sen-
ness Assembly sor and Print Engine
Controller PWB.
LVPS Harness PL 9.2 Connects LVPS
Assembly item 1 Assembly and Print
Engine Controller
PWB.
Table 16 Plug/Jack (P/J) Connector Locations
Location (Note 1)
Coordinate
P/J s Location
Name PL
162 F-42 LVPS PL 9.2
163 F-42 LVPS PL 9.2
164 F-42 LVPS PL 9.2
165 E-41 LVPS PL 9.2
166 E-41 LVPS PL 9.2
167 D-41 LVPS PL 9.2
168 F-41 LVPS PL 9.2
169 H-26 SMB-5V PL 9.2
171 C-41 Fuser PL 9.2
PWB
172 C-41 Fuser PL 9.2
PWB
174 J-7 Fuser PL 9.2
Assembly
177 J-8 Fuser PL 9.2
Interlock
Switch
178 J-8 Fuser PL 9.2
Interlock
Switch
02/2000
7-28
Harness (Note 2)
Harness Name Notes
(Note 3) Item #
I/L Harness 6 Connects LVPS
Assembly Assembly and Inter-
lock Switch (Fuser
Interlock Switch, I/R
switch).
System Controller PL 9.2 Connects LVPS
PWB 3.3V Har- Assembly and System
ness Assembly Controller PWB.
Motor Assembly PL 7.1 Connects LVPS
Assembly and Main
Motor Assembly.
Main Fan PL 9.1 Connects LVPS
Assembly and Main
Fan.
LVPS Fan PL 9.1 Connects LVPS
Assembly and LV Fan.
Inlet PL 9.1 Connects LVPS
Assembly and Inlet
Assembly.
System Controller 4 Connects LVPS
PWB 5V Harness Assembly and SMB-
Assembly 5V.
System Controller 4 Connects SMB-5V,
PWB 5V Harness LVPS and System
Assembly Controller PWB.
Fuser Harness 10 Connects Fuser PWB
Assembly and Print Engine Con-
troller PWB.
Fuser Harness 10 Connects Fuser PWB,
Assembly Fuser Assembly and
Fuser Interlock Switch.
Fuser Harness 10 Connects Fuser
Assembly Assembly, Fuser PWB,
Fuser Interlock Switch,
Print Engine Controller
PWB and HVPS.
Fuser Harness 10 Connects Fuser Inter-
Assembly lock Switch and Fuser
Assembly.
Fuser Harness 10 Connects Fuser Inter-
Assembly lock Switch and Fuser
PWB.
DocuPrint N2025/N2825
Initial Issue