Rep 7.6 Left Print Cartridge Guide Assembly; Rep 7.7 Btr Assembly - Xerox DocuPrint N2025 Service Manual

REP 7.6 Left Print Cartridge Guide Assembly

Parts List on PL 8.1
Removal
Switch off the power and disconnect the Power Cord.
1. Open the Rear Cover.
2. Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect it from
light.
3. Remove the Left Side Cover (REP 1.1).
4. Remove the Top Cover Assembly (REP 1.3).
5. Remove the BTR Assembly (REP 7.7).
6. Remove the two screws that secure the Print Cartridge Left Guide Assembly to the printer
(Figure 1).
7. Remove the Print Cartridge Left Guide Assembly from the printer (Figure 1).
8. Remove the Left Guide Link Assembly and Pin Link from the printer (Figure 1).
Figure 1 Left Print Cartridge Guide Assembly
Replacement
1. Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2025/N2825
WARNING

REP 7.7 BTR Assembly

Parts List on PL 5.1
Removal
Switch off the power and disconnect the Power Cord.
1. Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect it from
light.
NOTE: During the following steps, do not touch the black roll part of the BTR. Oil from
your hands can cause copy quality problems.
2. Lift the orange handle on the left end of the BTR Assembly (Figure 1). Pull up on the han-
dle to free the left end of the BTR.
3. Use your finger to lift the right end of the BTR Assembly (Figure 1).
4. Place the BTR roll on a sheet of clean paper and cover it with another sheet of paper.
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-41
WARNING
Figure 1 BTR Assembly
Repair-Adjustment
REP 7.6, REP 7.7