Xerox DocuPrint N2025 Service Manual page 247

Table 1 600 dpi
Paper Size
Legal 13" (SEF), Legal 14" (SEF), B4 (SEF)
A3 (SEF), Ledger (SEF)
• 1200dpi
Table 2 1200 dpi
Paper Size
A4 (LEF), Letter (LEF), Statement (LEF), A5
(LEF), B5 (LEF), Executive (LEF)
B5 (SEF), Letter (SEF), A4 (SEF)
Legal 13" (SEF), Legal 14" (SEF), B4 (SEF)
A3 (SEF), Ledger (SEF)
NOTE: Long roll specifications represent special options subject to the conditions of the
OEM contract with Fuji Xerox.
NOTE: In the above tables, SEF indicates feeding from the short edge of paper (a.k.a.
"portrait" orientation); LEF from the long edge of paper (a.k.a. "landscape" orientation).
NOTE: PPM stands for pages per minute, the number of sides printed in one minute.
1.5 Paper
1.5.1 Paper Sizes
Table 3 lists the various paper sizes that the Duplex Assembly is capable of handling.
Table 3 Paper Sizes
Paper Size
Standard Ledger (SEF)
Paper
A3 (SEF)
B4 (SEF)
Legal 14" (SEF)
Legal 13" (SEF)
A4 (SEF)
Letter (SEF)
B5 (SEF)
Letter (LEF)
A4 (LEF)
B5 (LEF)
Initial Issue
DocuPrint N2025/N2825
Tray 2 or Tray 3 or
2000 Sheet 2000 Sheet
Tray 1 Feeder Feeder
15.8 PPM 15.8 PPM 15.8 PPM
15.8 PPM 15.8 PPM 15.8 PPM
Tray 2 or Tray 3 or
2000 Sheet 2000 Sheet
Tray 1 Feeder Feeder
14.1 PPM 14.1 PPM 14.1 PPM
7.9 PPM 7.9 PPM 7.9 PPM
7.9 PPM 7.9 PPM 7.9 PPM
7.9 PPM 7.9 PPM 7.9 PPM
Duplex Print (One- Duplex Print (Two-
Sheet Batch) Sheets Batch)
O
O
O
O
O
O
O
O O
O O
O
Paper Size
A5 (LEF)
NOTE: Long roll specifications represent special options subject to the conditions of the OEM
contract with Fuji Xerox.
NOTE: The control system treats the nobi paper size the same as nonstandard sizes.
1.5.2 Kinds of Paper
Size range that the Duplex Assembly can handle is from A5 to A3/Ledger and weight range is
from 64 (16 lbs) GMS to 105 (28 lbs) GMS.
1.6 Periodical Replacement Parts
Although we make no specific recommendations as to parts to be replaced at regularly sched-
uled intervals, we note that, in the interests of preventing breakdowns, the following parts are or
contain rolls or belts subject to wear from paper contact and other sources.
• Duplex Roll Assembly (Upper)
• Duplex Roll Assembly (Lower)
• Belt 160 S2M
NOTE: Although we make no replacement part recommendations for users of standard
A4 (landscape) sheets, we expect the replacement interval for users of nonstandard
sizes, A3 sheets, etc. to be less than half that for users of standard A4 (landscape)
sheets. (Note that duplex printing is counted as two pages.)
1.7 Environment
1.7.1 Noise Levels with Duplex Assembly Installed
The below sound pressure is measured in accordance with ISO 7779 when the Cover Front of
the P/H Assembly is closed.
During printing:50.5 dB (using 4024 20lb Letter LEF and 2000 Sheet Feeder is not installed.)
During standby:35.0 dB (using 4024 20lb Letter LEF.)
NOTE: The noise levels without the options installed are as follows.
During printing: 49.5 dB (no 500 Sheet tray is installed), 50.5 dB (with Tray 2 and Tray 3),53.0
dB (with 2000 Sheet Feeder) During standby: 35.0 dB
02/2000
6-15
Table 3 Paper Sizes
Duplex Print (One- Duplex Print (Two-
Sheet Batch) Sheets Batch)
O
General Procedures / Information
GP 2.3