REP 12.14 Harness Assembly
Parts List on PL 12.2
Removal
Switch off the power and disconnect the Power Cord.
1.
Remove the Printer / 500 Sheet Feeder (REP 12.1).
2.
Remove the Left Side Cover (REP 12.2).
3.
Remove the Lower Rear Cover (REP 12.4).
4.
Disconnect P/J601 from the 2000 Sheet Feeder PWB (Figure 1).
5.
Release the harness from all cable clamps (Figure 1).
6.
Remove the two screws that secure the harness connector to the frame (Figure 1).
7.
Guide the harness through the holes in the frame as you remove it (Figure 1).
Figure 1 Harness Assembly
Replacement
1.
Reinstall the components in the reverse order.
Repair-Adjustment
REP 12.14, REP 12.15
WARNING
REP 12.15 Drive Assembly
Parts List on PL 12.2
Removal
Switch off the power and disconnect the Power Cord.
1.
Open the Upper Rear Cover.
2.
Remove the screw that secures the back of the Drive Assembly (Figure 1).
3.
Remove the Tray Assembly (REP 12.7).
4.
Disconnect P/J615 from the Drive Assembly (Figure 1).
5.
Remove the screw that secures the front of the Drive Assembly (Figure 1).
6.
Remove the Drive Assembly (Figure 1).
Replacement
1.
Reinstall the components in the reverse order.
02/2000
4-84
WARNING
Figure 1 Drive Assembly
DocuPrint N2025/N2825
Initial Issue