Figure 2 Upper Exit Chute
Figure 3 Stack Full Sensor
Replacement
1.
Reinstall the components in the reverse order.
NOTE: The two shoulder screws go in the right end of the Lower Exit Chute Assembly
(Figure 1).
Repair-Adjustment
REP 5.2, REP 5.3
REP 5.3 Stack Full Actuator
Parts List on PL 6.1
Removal
Switch off the power and disconnect the Power Cord.
1.
Open the Rear Cover.
2.
Remove the Rear Cover (REP 1.9).
3.
Remove the Stack Full Sensor (REP 5.2).
4.
Carefully pull the actuator out of the holder (Figure 1).
Figure 1 Stack Full Actuator
Replacement
1.
Reinstall the components in the reverse order.
02/2000
4-30
WARNING
DocuPrint N2025/N2825
Initial Issue