Rep 9.5 Lower Roll Assembly; Rep 9.6 Sensor Assembly - Xerox DocuPrint N2025 Service Manual

REP 9.5 Lower Roll Assembly

Parts List on PL 13.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Duplex Assembly (REP 9.1).
2. Remove the E-ring and bearing from the left end of the Roll Assembly (Figure 1).
3. Remove the E-ring and collar from the right end of the Roll Assembly (Figure 1).
4. Remove the Belt, pulley, and bearing from the right end of the Roll Assembly (Figure 1).
5. Remove the Lower Roll Assembly (Figure 1).
Figure 1 Lower Roll Assembly
Replacement
1. Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2025/N2825
WARNING

REP 9.6 Sensor Assembly

Parts List on PL 13.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Duplex Assembly (REP 9.1).
2. Disconnect P/J512 from the Duplex PWB (Figure 1).
3. Release the four locking tabs and remove the sensor (Figure 1).
Figure 1 Sensor Assembly
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-53
WARNING
Repair-Adjustment
REP 9.5, REP 9.6