Rep 11.21 No Paper Actuator; Rep 11.22 Preregistration Sensor - Xerox DocuPrint N2025 Service Manual

REP 11.21 No Paper Actuator

Parts List on PL 11.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the printer from the 500 Sheet Feeder (REP 11.1).
2. Remove the paper tray from the feeder.
3. Remove the Front Cover (REP 11.2).
4. Remove the Left Cover (REP 11.3).
5. Remove the 500 Sheet Feed Head Assembly (REP 11.9).
6. Remove the actuator from the Feeder Chute (Figure 1). (A small screwdriver may be used
to pry the actuator free of the retaining clips.
Figure 1 No Paper Actuator
Replacement
1. Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2025/N2825
WARNING

REP 11.22 Preregistration Sensor

Parts List on PL 11.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the printer from the 500 Sheet Feeder (REP 11.1).
2. Remove the paper tray from the feeder.
3. Remove the Front Cover (REP 11.2).
4. Remove the Left Cover (REP 11.3).
5. Remove the Feed Head Assembly (REP 11.9).
6. Remove the screw that secures the sensor cover (Figure 1). Remove the cover.
7. Disconnect the P/J13C from the Preregistration Sensor.
8. Release the four locking tabs and remove the sensor (Figure 2).
Figure 2 Preregistration Sensor
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-75
WARNING
Figure 1 Sensor Cover
Repair-Adjustment
REP 11.21, REP 11.22