Xerox DocuPrint N2025 Service Manual page 255

1. Pressing either the Up Menu or Down Menu keys enters the Menu system and causes
"Menus" to appear on the top line and the name of the menu to appear on the bottom line.
2. Pressing the Up Item or Down Item keys after entering the Menu system with step 1 for
any menu except the Password Menu causes the top line to indicate the current menu and
the bottom line to scroll through the items in the selected menu. If the Job menu, Reset
menu or Print menu is displayed (with the exception of "Language" in the Reset menu),
the bottom line indicates an action to be taken (e.g., "Config Sheet" or "PCL Font List").
Pressing the Enter key will cause the action to be taken, and the display (using either one
or two lines) indicates the action taken (e.g., "Processing" on the top line and "Config
Sheet" on the bottom line). The display exists the Menu system and returns to the On-line,
Ready state following the action. For all other menus, the Enter key is ignored until a value
is displayed (step 3).
3. Pressing the Up or Down Value keys after step 2 causes the top line to indicate the item
name with an "=" in the right most column. The bottom line indicates the current default
value of the item followed by an asterisk (*). The current default value is displayed first
when either Value key is pressed the first time after step 2 above. Additional key presses
of the Values keys cause the display to scroll up or down through the possible values for
the selected item. An asterisk does not follow a value displayed that is not the current
default.
4. Pressing the Enter key after step 3 above causes the displayed value to be loaded in
NVM. The display returns to the current menu and current item.
5. Pressing On-line at any time causes the Control Panel to exit the Menu system.
NOTE: The printer will automatically exit the Menu system after 60 seconds have elapsed with
no Control Panel key presses.
The following examples illustrate the menu navigation and display message sequences that
take place when setting default parameters (Example #1) and when involving a printer action
(Example #2).
Example 1 -
Example 2 -
Initial Issue
DocuPrint N2025/N2825
3.4 Special Menu Navigation Procedures
Some of the items in the Ethernet, Token Ring and Novell menus require a slightly different
menu navigation technique from that described in section 3.3. The following menu items
require this special navigation technique. Details of each item can be found in section 5.
• Ethernet Menu>IP Address, Token Ring Menu>IP Address
• Ethernet Menu>Subnet Mask, Token Ring Menu>Subnet Mask
• Ethernet Menu>Default Gateway, Token Ring Menu>Default Gateway
• Token Ring Menu>LAA
• Novell Menu>PServer Name
• Novell Menu>Primary Server
• Novell Menu>NDS Tree
• Novel Menu>NDS Context
The special menu navigation procedure is described below:
1. Pressing either the Up Menu or Down Menu keys enters the Menu system and causes
"Menus" to appear on the top line and the name of the menu to appear on the bottom line.
2. Pressing the Up Item or Down Item keys after entering the Menu system with step 1 for
the affected menus causes the top line to indicate the current menu and the bottom line to
scroll through the items in the selected menu.
3. Pressing the Up or Down Value keys after step 2 causes the top line to indicate the item
name with an "=" in the right most column. The bottom line indicates the current default
value of the item, with the cursor under the first portion of the value that will be changed
with the "Value" keys. The current default value is displayed first when the either Value key
is pressed the first time after step 2 above. Additional key presses of the Value keys cause
that portion of the value that is above the cursor to scroll up or down through the possible
values for the selected item.
4. Pressing the Up or Down "Item" keys cause the cursor to move left and right respectively
to the next portion of the value to be changed.
5. Pressing the Enter key will cause the current value to be loaded in NVM. The display
returns to the current menu on the top line and the current item on the bottom line.
02/2000
6-23
General Procedures / Information
GP 3.2