REP 11.5 Rear Cover
Parts List on PL 11.1
Removal
Switch off the power and disconnect the Power Cord.
1.
Open the Rear Cover.
2.
Carefully pry the left hinge pin (as viewed from the rear of the feeder) out of the printer
frame (Figure 1).
3.
Pull the right end of the cover out and up (Figure 1). Remove the cover.
Figure 1 Rear Cover
Replacement
1.
Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2025/N2825
WARNING
REP 11.6 Drive Assembly
Parts List on PL 11.2
Removal
Switch off the power and disconnect the Power Cord.
1.
Remove the paper tray from the feeder.
2.
Remove the Front Cover (REP 11.2).
3.
Remove the Left Cover (REP 11.3)
4.
Disconnect P/J13B from the Feeder PWB (Figure 1).
5.
Remove the four screws that secure the Drive Assembly to the printer frame (Figure 1).
Remove the Drive Assembly.
Figure 1 Feeder Drive Assembly
Replacement
1.
Reinstall the components in the reverse order.
02/2000
4-65
WARNING
Repair-Adjustment
REP 11.5, REP 11.6