REP 12.24 Shaft Cover Assembly
Parts List on PL 12.4
Removal
Switch off the power and disconnect the Power Cord.
1.
Remove the 2000 Sheet Feeder Tray Assembly (REP 12.7).
2.
Remove the four screws that secure the Shaft Cover Assembly to the Tray Assembly (Fig-
ure 1).
3.
Remove the cover (Figure 1).
Figure 1 Shaft Cover Assembly
Replacement
1.
Reinstall the components in the reverse order.
Repair-Adjustment
REP 12.24, REP 12.25
WARNING
REP 12.25 Drive Shaft Assembly
Parts List on PL 12.4
Removal
Switch off the power and disconnect the Power Cord.
1.
Remove the 2000 Sheet Feeder Tray Assembly (REP 12.7).
2.
Remove the Shaft Cover Assembly (REP 12.24).
3.
Align the Drive Shaft Assembly with the hole in the Shaft Cover Assembly (Figure 1).
4.
Remove the two screws that secure the Drive Shaft Bracket to the shaft cover (Figure 1).
5.
Remove the Drive Shaft Assembly.
Figure 1 Drive Shaft Assembly
Replacement
1.
Reinstall the components in the reverse order.
02/2000
4-90
WARNING
DocuPrint N2025/N2825
Initial Issue