Rep 4.1 Paper Transport Assembly - Xerox DocuPrint N2025 Service Manual

REP 4.1 Paper Transport Assembly

Parts List on PL 5.1
Removal
Switch off the power and disconnect the Power Cord.
1. Open the Rear Cover.
2. Remove the Fuser Assembly (REP 5.1).
3. Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect it from
light.
4. Remove Tray 1.
5. Remove the MBF Assembly (REP 2.1).
6. Remove the Left Side Cover (REP 1.1).
7. Remove the Top Cover Assembly (REP 1.3).
8. Remove the HVPS Cover (REP 1.6).
9. Disconnect plug P185 (R) from the top of transformer T503 on the HVPS PWB (Figure 1).
10. Remove the screw that secures the Detack Saw Wire to the assembly (Figure 1).
11. Remove the wires from cable clamps.
12. Disconnect P/J222 from the bottom of the Registration Clutch (Figure 1).
13. Remove the four screws that secure the Paper Transport Assembly to the printer (Figure
1).
NOTE: When removing the Paper Transport Assembly, do not touch the BTR roll with your
hands. Oil from your hands can cause copy quality problems.
14. Guide the high voltage leads through the holes in the printer frame as you remove the
Paper Transport Assembly.
Initial Issue
DocuPrint N2025/N2825
WARNING
Figure 1 Paper Transport Assembly
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-25
Repair-Adjustment
REP 4.1