Parts List; Introduction - Xerox DocuPrint N2025 Service Manual

Introduction

Overview
The Parts List section provides exploded view illustrations of all spared subsystem
components and a listing of the corresponding part numbers. The illustrations show the
relationships between parts.
Organization of this Section
The following elements make up the Parts List section:Parts Lists (PL)Each item number in the
part numbers listing corresponds to an item number in the illustration. All the parts in a given
subsystem of the machine will be located in the same illustration or in a series of associated
illustrations. The parts which are not spared are indicated by "- -" in the Part column.
Exploded View IllustrationsAn item that is called out on an illustration has a corresponding
listing within this section.Components are given item numbers that correspond to the part
number listings. Hardware items are lettered. All hardware dimensions are in millimeters
unless otherwise noted.
Assemblies and kits are a combination of several separate components. A bracket is used on
the illustration when an assembly or kit is spared but is not shown. The item number of the
assembly or kit precedes the bracket; the item numbers of the piece parts follow it.Part Number
IndexThis index lists all the spared parts in the system in numerical order. Each number is
followed by a reference to the parts list on which the part may be found.
Other InformationAbbreviationsAbbreviations which may be used in the parts lists text or
illustrations are as follows:US ------ United States Parts Distribution SystemXE ------ European
Parts Distribution SystemAO ------ South America Parts Distribution SystemXCL ------ Canada
Parts Distribution SystemP/J ------ Plug/Jack P/O ------ Part ofW/ ------ WithW/O ------
WithoutTagA Tag is used when a part or area of the system has been modified. The Change
Tag Index, which is found in the General Procedures/Information Section, lists the name and
purpose of the Tag. In some cases, you will go to the parts lists and find a part number listed as
"with Tag." Go to the Change Tag Index for a description of what the Tag is and what you need
to install the Tag. The Change Tag Index will either list a kit number or indicate "piece part." If
"piece part" is indicated, the parts lists reference(s) will be given and all parts associated with
the Tag will have to be individually located, ordered, and installed.The notation "P/O Tag" after
a part number indicates that the item is part of a Tag. The notation "Tag" after a part number
will be used only to indicate the entire Tag, whether that is a kit number or an individual
part.Whenever you install a Tag kit or all the piece parts that make up a Tag, mark the
appropriate number on the Tag matrix.
Using the Parts List
1. The numbers shown in each illustration correspond to the parts list number for that
illustration.
2. Throughout this manual, parts are identified by the prefix "PL", followed by a number, a
decimal point, and another number. For example, PL3.1.12 means the part is item 12 of

parts list 3.1.

3. The capital letters "C", "E", and "S" shown in an illustration stand for C-ring, E-ring, and
Screw, respectively.
4. A shaded triangle t in an illustration indicates the item is part of an assembly.
Initial Issue
DocuPrint N2025/N2825
5. The notation "with X~Y" following an part name indicates an assembly that is made up of
components X through Y. For example, "1 (with 2~4)" means part 1 consists of part 2, part
3, and part 4.
6. The notation "RS" means that the part is a requested spare. Part numbers for these parts
will be provided as soon as they are available.
7. An asterisk * following a part name indicates the page contains a note about this part.
8. The notation "J1<>J2 and P2" is attached to a wire harness. It indicates that connector
jack 1 is attached to one end of the wire harness and connector jack 2 is attached to the
other end that is plugged into plug 2.
9. A notation "(part of item 1.1)" indicates that the part is included with item 1.2.1 (PL1.2, line
item 1).
02/2000
5-3
Parts-list
Introduction