GP 5.8 Drive Power Transmission to the Registration Rolls
The drive power generated by the Motor: Main is transmitted to the Registration Clutch through
the Gear Assembly: Main. Figure 1 & Figure 2
When the Registration Clutch is activated, the drive power is transmitted through the Registra-
tion Clutch to the Rubber Registration Gear (the Rubber Registration Roll).
The drive power is further transmitted through the Rubber Registration Gear to the Metal Reg-
istration Gear (the Metal Registration Roll).
Figure 2 Registration Rolls
Figure 1 Drive to Registration Rolls
Initial Issue
General Procedures / Information
02/2000
GP 5.8
DocuPrint N2025/N2825
6-61