Rep 9.3 Drive Belt; Rep 9.4 Upper Roll Assembly - Xerox DocuPrint N2025 Service Manual

REP 9.3 Drive Belt

Parts List on PL 13.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Duplex Assembly (REP 9.1).
2. Remove the E-ring and collar from the right end of the Upper Roll Assembly (Figure 1).
3. Remove the Belt (Figure 1).
Figure 1 Duplex Drive Belt
Replacement
1. Reinstall the components in the reverse order.
Repair-Adjustment
REP 9.3, REP 9.4
WARNING

REP 9.4 Upper Roll Assembly

Parts List on PL 13.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Duplex Assembly (REP 9.1).
2. Remove the Exit Motor Assembly (REP 9.2).
NOTE: The type and size of screws as you remove them in step three.
3. Remove the six screws that secure the Left Bracket Assembly (Figure 1). Remove the
bracket.
4. Remove the E-ring, Z15 gear, and bearing from the left end of the Upper Roll Assembly
(Figure 1).
5. Remove the E-ring, collar, pulley, and bearing from the right end of the Upper Roll Assem-
bly (Figure 1).
6. Remove the Upper Roll Assembly (Figure 1).
Figure 1 Upper Roll Assembly
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-52
WARNING
DocuPrint N2025/N2825
Initial Issue