Gp 5.23 Offsetting Catch Tray - Xerox DocuPrint N2025 Service Manual

GP 5.23 Offsetting Catch Tray

Paper Transportation Figure 1 & Figure 2
Paper is fed from the Cassette Assembly or the Tray Assembly MBF and transported through
the printer to the exit along the paper paths shown below when the optional OCT Assembly is
installed. The OCT Assembly adds the offset paper discharging.
Figure 1 Paper Transportation
General Procedures / Information
GP 5.23
The Figure below is a cut-away side view of the N2025/N2825 printer that shows the paper
paths and the major components directly related to the paper transportation of the printer with
the optional OCT Assembly installed.
Figure 2 Paper Transportation
Drive Power Transmission
The optional OCT Assembly has its own motors (Motor Assembly OCT and Motor Assembly
Offset) for the paper transportation and the offset discharging. The drive power generated by
the Motor Assembly OCT is transmitted to the paper driving rolls in the OCT Assembly through
the drive gears. The drive power generated by the Motor Assembly OCT is used to transmit the
paper through the path toward the Offset Assembly and re-feed toward the Duplex Assembly
after receiving the return paper. The drive power generated by the Motor Assembly Offset is
used to discharge the paper with or without offset, or re-feed the paper toward the Duplex
Assembly at the duplex mode.
02/2000
6-88
Initial Issue
DocuPrint N2025/N2825