GP 5.10 Drive Power Transmission to the Fuser and the
Exit Roll Assembly
The drive power generated by the Main Motor is transmitted to the Fuser through the Main
Gear Assembly. Figure 1 & Figure 2
The drive power transmitted to the H/R Gear is further transmitted to the Gear Assembly C/G
(Exit Assembly) through the Decurler Gear.
Figure 1 Fuser and Exit Roll Drives
Figure 2 Fuser and Exit Roll Drives
Initial Issue
General Procedures / Information
02/2000
GP 5.10
DocuPrint N2025/N2825
6-63