Duplex Assembly - Xerox DocuPrint N2025 Service Manual

Duplex Assembly

Location of P/J Connectors
Use the P/J table below (Table 1) and the P/J Map (Figure 1) on the next page to locate a spe-
cific P/J connector within the Feeder and Cassette.
• Locate the P/J connector number in the first column of the table Table 1.
• Locate the corresponding coordinates in the second column, such as I7 or J7.
• Go to the map Figure 1.
• Cross-reference the letter and number of the P/J coordinates with the letters and numbers
on the map.
• The P/J connector is located within the area where the coordinates cross.
Table 1 P/J Locations
Connector Coordinate Description
P 503 D7 Connects the Duplex Assembly (Duplex PWB) to the
Printer.
P/J 508 C8 Connects the Duplex Motor to the Duplex PWB.
P/J 509 C7 Connects the Duplex Motor.
P/J 510 C7 Connects the Exit Motor to the Duplex PWB.
P/J 511 B5 Connector Inside the Exit Motor.
P/J 512 E8 Connects the Duplex SNS Harness to the Duplex PWB.
P/J 513 F8 Connects the SNS Harness to the Duplex Sensor.
Initial Issue
DocuPrint N2025/N2825
02/2000
7-37
Figure 1 P/J Map
Duplex Assembly
Wiring Data