REP 13.17 Feed Belts
Parts List on
PL 12.2
Removal
WARNING
Switch off the power and disconnect the Power Cord.
1.
Remove the Envelope Feeder from the printer.
2.
Remove the Bottom Cover
(REP
13.1).
3.
Remove the Top Chute
(REP
13.2).
4.
Remove the Envelope Feeder PWB
(REP
5.
Remove the Gear Cover
(REP
13.11).
6.
Remove the Feed Clutch
(REP
13.12).
7.
Remove the Bottom Roll Assembly
(REP
8.
Remove the Feed Roll Assembly 1
(REP
9.
Remove the two pinch rolls from under the feed belts
10. Rotate one side of the belt and slide it through the slot in the frame
the belts.
Figure 1 Pinch Roll
Initial Issue
DocuPrint N2125
13.3).
13.14).
13.15).
(Figure
1).
(Figure
2). Remove
manuals4you.com
manuals4you.com
Replacement
1.
Reinstall the components in the reverse order.
02/2000
4-113
Figure 2 Feed Belts
Repair-Adjustment
REP 13.17