Rep 4.4 Fuser; Rep 4.4.1 Fuser Assembly - Xerox DocuPrint P1202 Service Manual

REP 4.4 Fuser

REP 4.4.1 Fuser Assembly

1 Disconnect the AC Power Cord and remove the Paper Tray.
2 Remove the Printer Cartridge (REP 4.5.1).
3 Remove the System Controller PWB (REP 4.6.2).
4 Remove the Control Panel Harness Cover (REP 4.1.2).
5 Disconnect the Control Panel Harness from J1 on the Control Panel.
6 Remove the Main Cover (REP 4.1.3).
7 Remove the three screws from the Exit Idler Gear Assembly (Figure 4.4.1a).
8 Remove the two screws that secure the Printer Engine PWB Cover (Figure 4.4.1b). Remove the
cover.
Xerox DocuPrint P1202 Service Manual
Figure 4.4.1a
Figure 4.4.1b Fuser Assembly.
3/99
www.printcopy.info
4-21
egl_345a
egl_347a
Repair Procedures