Table of Contents
Advertisement
Top Cover
1. Remove the left rear cover (page 401).
2. Remove the right rear cover (page 402).
3. Remove the screws (2) fastening the face up paper output tray to the
printer, then pull out the tray and remove it from the printer.
4. Remove the screws (4) on the paper exit side.
Screws (4)
Face up paper
output tray
5. Loosen the screw that secures the top cover to the rear frame. (See
illustration on page 407.)
Overview
Screws (2)
405
Advertisement
Chapters
Table of Contents
