10
Replacement Procedures
Overview
This chapter describes the mechanical structure of the printer and how to
detach the various parts.
The printer should be reassembled in the reverse order of the procedures
specified in this chapter. Return the screws to their original positions, as they
may vary in type with the position. Designations such as "screws (3)"
represent the number of screws.
WARNING
For safety, always disconnect the power supply plug before removing
parts. Also, never operate the printer with parts removed, except when
performing inspections and adjustments specified in this manual.
VORSICHT
Aus Sicherheitsgründen müssen immer den Netzstecker herausziehen,
ehe Sie Teile entfernen. Niemals den Lader in Betrieb nehmen, wenn
Teile fehlen, es sei denn, Sie führen Überprüfungs– und
Einstellaufgaben nach den Angaben in diesem Handbuch aus.
399