Table of Contents
Advertisement
Top Cover
It is necessary to remove the rear cover before removing the top cover. Then, remove
the top cover as described below.
1. Pull out the tray by removing the screws (2) fastening the paper face–up output
tray.
2. Remove the screws (4) on the paper exit side.
Screws (4)
3. Loosen the screw that secures the top cover to the rear frame. (See illustration on
page 10–12.)
10–10
Paper face–up
output tray
Screws (2)
Replacement Procedures
Advertisement
Chapters
Table of Contents
