5. Remove the nuts (2) and lockwashers (2) securing the wires to the
capacitor terminals.
6. Remove the screw (1) securing the ground wire (FG wire) to the ground
terminal on the capacitor.
7. Remove the screws (4) securing the capacitor to the base of the flash
power supply.
8. Remove the capacitor from the flash power supply.
9. Replace the capacitor with a new one by reversing the above steps.
10. Reinstall the flash power supply.
Other
Tractor Removal
The tractors are secured by the tractor splined shaft and tractor support shaft,
as shown below, and are removed as described in the steps that follow.
Tractor
Tractor splined shaft
Tractor support shaft
Other
505