Printronix L5035 Maintenance Manual page 40

Chapter 10
Replacement Procedures
CAUTION
The transfer charger must be in the down position to avoid scratching
the drum.
9. Check that the transfer charger is in the down position, and if not, move it
to the down position by rotating the transfer elevator drive shaft
counterclockwise. Watch the charger movement:
a. If the charger starts to move up, it is in the down position.
b. If the charger starts to move down, continue to rotate the drive shaft
10. Lower the transport unit by turning the green lever on the transport unit to
the left.
418
until the charger is all the way down.
Transfer elevator
drive shaft
Transfer charger
Green lever