Printronix L5035 Maintenance Manual page 93

Output roller drive belts
Five (5) belts, A through E, are incorporated into the roller drive mechanism.
These belts must be removed in the following order: A, B, D, E, and C.
Belt E (703531-030)
Belt D (703531-029)
1. Remove belt A by removing the tension roller spring and pulling the
tension roller upward.
Tension roller
2. Remove the E-ring from the shaft on which pulley G is mounted.
3. Remove belt B and pulley G by turning pulley G.
Belt A (703531-028)
Belt B (703531-031)
Belt C (703531-031)
Tension roller spring
Pulley G
E-ring
Belt B
Inside the Rear Cover
Belt A
471