Miscellaneous - Printronix L5035 Maintenance Manual

Chapter 10
Replacement Procedures

Miscellaneous

Tension arm
To remove the tension arm above the eject gate solenoid, remove the E-ring
on the rotation axis.
Main charger (MCH) Varistor
1. One terminal of the main charger varistor is connected to the main
charger connector via high voltage cable. Remove the screw securing this
varistor terminal to the high voltage connector.
2. Remove the screws securing the other varistor terminal to the rear panel.
468
Tension arm
E-ring
Screws (3)
Varistor