Printronix L5035 Maintenance Manual page 327

4. Remove the screws (4) securing the table support arms (2) to the stacker
arm brackets (2), then remove the two table support arms, as shown
below.
Screws (4),
in step 4
Screws (4),
in step 5
5. Remove the screws (6) securing the stacker arm brackets (2) to the
elevator carriage assembly, then remove the two stacker arm brackets,
as shown above.
Belt Removal Procedures
Table support arms (2)
Screws (2),
in step 5
Elevator
carriage
assembly
Stacker arm
brackets (2)
705