Printronix L5035 Maintenance Manual page 76

Chapter 10
Replacement Procedures
3. From the rear of the bracket, remove the screws (8) that secure the
motors to the assembly bracket.
E-ring
Gear 3
4. Loosen the setscrews (4), then remove the gears (2) from the motor
shafts.
5. Remove the motors from the bracket.
6. If you are replacing gear 3, refer to the figure above and remove the E-
ring that secures the gear to the shaft.
454
Setscrews
Gear
Motor screws (8)
Gear
Bracket