Printronix L5035 Maintenance Manual page 329

10. Remove the stacker elevator belt from one of the elevator upper pulley
assemblies as follows:
a. Remove either of the E-clips, then pull the stacker elevator pulley pin
out of the stacker elevator pulley bracket.
Stacker elevator pulley pin
E-clip
Stacker elevator belt
b. Remove the stacker elevator pulley with attached stacker elevator
belt from the stacker elevator pulley bracket.
c. Replace the stacker elevator belt.
Belt Removal Procedures
Stacker elevator pulley bracket
E-clip
Stacker elevator pulley
707