Chapter
10
Replacement Procedures
9. Left side adjustment: Lift up the tractor support shaft and apply a small
amount of force toward the tractor splined shaft. Once the tractor support
shaft is against the tractor alignment tool, hold them together and tighten
the screw holding the tractor support shaft on the left side frame.
Screw
Tractor splined shaft
10. Right side adjustment: Repeat the procedure in step 9 above on the right
side frame.
11. Ensure that the tractor alignment tools can be easily removed. If they are
too tight or too loose, make the adjustments in steps 9 and 10 again.
12. Remove the tractor alignment tools.
13. Return the left tractor spacer, left and right tractors, and E-ring to their
original positions.
14. Load fanfold paper.
510
Tractor support shaft
Screw