Printronix L5035 Maintenance Manual page 334

Appendix D
Optional Power Paper Stacker
6. Remove the screws (3) securing the stacker motor assembly to the
stacker frame, then remove the stacker motor assembly, as shown below.
Stacker frame
Stacker motor
7. Remove the screw securing the sensor to the stacker motor assembly.
8. With a hex wrench, loosen the set screws (2) securing the stacker motor
gear, then remove the gear.
9. Remove the screws securing the stacker motor to the stacker motor
assembly.
10. Replace the motor.
11. Reassemble the parts in reverse order.
712
Screws (3)
Stacker motor assembly
Sensor mounting screw
(on bottom of sensor)
Sensor