Printronix L5035 Maintenance Manual page 64

Chapter 10
Replacement Procedures
3. Working from the underneath side of the transport assembly, remove the
EPS3 mounting screws (2), as shown below.
EPS4
Sensor
Assembly
EPS4
mounting
screws (2)
Fan plenum
Fan connector
4. Disconnect the EPS3 sensor assembly cable connector (not shown), then
remove the sensor assembly from the transport assembly.
442
EPS3
mounting
screws (2)
Screws (2) (remove)
Vacuum fan
Screws (2) (loosen)
EPS3
Sensor
Assembly