Printronix L5035 Maintenance Manual page 119

9. Remove the high-voltage terminal covers from the high-voltage terminals
on the rear of the fuser unit.
10. Mark or tag the high-voltage cables and their corresponding high-voltage
terminals on the fuser unit, so that you can reconnect them properly later.
11. Remove the screws (2) securing the high-voltage cables (2) to the high-
voltage terminals on the fuser unit.
$
$
High-voltage cables
(from flash power supply)
Behind the Stand Cover
Fuser unit
Screws (2)
High-voltage
terminal covers
497