Printronix L5035 Maintenance Manual page 94

Chapter 10
Replacement Procedures
4. Remove the screw (1) fastened to the scuff roller shaft, then remove the
flange.
5. Remove belts D and E.
6. Remove belt C from around pulley H by turning pulley H.
Printer frame
7. Remove the screws (3) that secure the feed motor bracket to the printer
frame, then remove the feed motor with its bracket attached.
472
Belt E
Flange
Belt D
Pulley H
Belt C
Feed motor bracket
Screws (3)
Screw
Feed motor