Paper Feed Cassettes
IPS 12/22
IPS 11/21
IPS 10/20
IPS 10, 11, and 12 = Upper level paper size detector sensors
IPS 20, 21, and 22 = Lower level paper size detector sensors
There are three holes in the forward end of the cut sheet paper feed
cassettes. Plastic inserts are to be set in these holes according to the size of
the cut sheet paper loaded in the cassette (as shown in the table below).
When the plastic inserts in the cassette contact the paper size sensors on the
printer, the printer determines that the paper cassette is in position and
identifies the paper size.
The available settings for the paper feed cassette are provided in the
following table (O = plastic insert):
Legal
Ledger
A3
B4
Letter
A4
Paper size
IPS 12/22
O
O
O
Control Principles
IPS 11/21
IPS 10/20
O
O
O
O
O
O
639