Elevator Belt - Printronix L5035 Maintenance Manual

Appendix D
Optional Power Paper Stacker

Elevator Belt

1. Remove the screws (4) securing the stacker table assembly to the table
support arms (2), then remove the stacker table assembly.
Stacker elevator cover
Screws (4),
in step 1
Stacker table assembly
2. Remove the knob.
3. Remove the screws (4) securing the stacker elevator cover, then remove
the cover, as shown above.
704
Screws (4 places),
in step 3
Knob
Table support arms (2)