Printronix L5035 Maintenance Manual page 129

4. Remove the E-ring securing the left tractor on the tractor support shaft.
E-ring
5. Slide the tractor splined shaft toward the rear side of the printer and
remove it.
6. On the rear side of the printer, remove the screw securing the tractor
support shaft, then remove the tractors and the tractor support shaft from
the paper feed side.
NOTE: After removing and replacing tractors, adjust the tractors by
performing the tractor adjustment procedure that begins on the
following page.
Tractor support shaft
Tractor splined shaft
Other
Screw
507