Table of Contents
Advertisement
Chapter 5
General Cleaning
CAUTION
Use caution in handling to avoid damaging or breaking the
charger wires.
14. Using the brush cleaner and the wire cleaner, clean the
chargers by removing the dust and dirt on the wires. (The
precharger contains one wire, while the transfer/separator
charger contains two wires).
15. After cleaning, return the chargers to their original positions.
Fasten the charger screws to secure them.
Cleaning The Fuser Unit Cover Glass
CAUTION
The fuser unit remains hot after operation. Wait until it has
completely cooled down before handling it.
Die Einbrennvorrichtung behält auch nach dem Betrieb ihre
Temperatur bei. Fassen Sie sie erst an, wenn sie vollständig
abgekuhlt ist.
La unidad de fusor estará a alta temperatura después de
funcionar. Espere a que se haya en friado por completo antes
de manipularia.
L'unité de four est encore trés chaude aprés chaque
opération. Attendez qu'elle refroidisse complétement avant de
la manipuler.
Dopo l'uso, l'unitá fusore é calda. Attendere il completo
raffeddamento dell'unitá prima di intervenir sulla medesima.
1. Turn the power switch OFF.
2. Open the printer front upper cover. (See page 124.)
178
WARNUNG
AVISO
ATTENTION
AVVERTENZA
Advertisement
Table of Contents
