Driving The Stacker; Driving The Elevator Motor; Driving The Swinger Motor; Driving The Assisting Arm Drive Motor - Printronix L5035 Maintenance Manual

Appendix D
Optional Power Paper Stacker
Status Confirmation Processing
Checks the detection data of the sensors and switches within the paper
feeding unit. If there is any abnormality, executes abnormality processing.
Communication Processing
Loads data transmitted from the printer, executes command analyzing
processing, and returns status.

Driving the Stacker

Initializes, drives, and stops the stacker.

Driving the Elevator Motor

Switches modes between stop, auto, and down. Also initializes the
elevator motor during printer initialization.

Driving the Swinger Motor

Initializes and terminates the swinger. Executes normal action, 1/2 inch
feed action (line feed), 1-page feed action (page feed), start position
changing action, overrun action, and paper output action.

Driving the Assisting Arm Drive Motor

Initializes and terminates the assisting arm. Executes normal action, 1/2
inch feed action, 1-page feed action, start position changing action,
overrun action, and paper output action.

Switch Monitoring

Checks the action of the four elevator switches on the front face (output
side) of the unit.
684