Transport Belt - Printronix L5035 Maintenance Manual

3. Remove the screws (6) that secure the right and left slide rails to the
assembly.
4. Lift the assembly from the rails and remove it.
The following replaceable parts are on the transfer assembly:
•

Transport belt

•
Vacuum fan (VAF)
•
Elevator paper start sensor
•
Elevator paper intermediate sensor
•
Connector block for the transfer/separator charger
•
Varistor
Transport belt
When replacing the transport belt, the transfer assembly must be turned
upside-down. When turning the unit upside-down, be sure to put a rest
Inside the Front Cover
Screws
Slide rail
435