Removing A Drive From A Drive Carrier; Figure 5-7 Removing A Dummy Drive - Silicon Graphics Rackable C2112-4KL1 User Manual

Removing a Drive from a Drive Carrier

007-6471-001
If you are replacing a failed drive or dummy drive, use the following steps:
1. Remove the screws connecting the drive tray (or dummy drive) to the carrier.
See Figure 5-7 and Figure
2. Slide the drive from the carrier.
Figure 5-7 Removing a Dummy Drive
Caution: Except for short periods of time while swapping hard drives, do not operate the server
with the hard drive carriers empty.
5-8.
Installing and Removing Disk Drives
41