: Click to undo any changes made locally and revert to previously saved values.
: Return to the previous page.
4.5.5.4 ACL Ports Configuration
Configure the ACL parameters (ACE) of each switch port. These parameters will affect frames received on a port unless the
frame matches a specific ACE. The ACL Ports Configuration screen in
The page includes the following fields:
Object
Port
Policy ID
Action
Rate Limiter ID
Port Redirect
Mirror
Figure 4-5-5-4: ACL Ports Configuration Page Screenshot
Description
The logical port for the settings contained in the same row.
Select the policy to apply to this port. The allowed values are 0 through 255.
The default value is 0.
Select whether forwarding is permitted ("Permit") or denied ("Deny").
The default value is "Permit".
Select which rate limiter to apply on this port. The allowed values are Disabled or
the values 1 through 16.
The default value is "Disabled".
Select which port frames are redirected on. The allowed values are Disabled or a
specific port number and it can't be set when action is permitted. The default
value is "Disabled".
Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
User's Manual of IGS-6325 series
Figure 4-5-5-4
appears.
330