Ip Arp Inspection Check-Vlan; Ip Arp Inspection Logging - Planet Networking & Communication GS-2240-48T4X Command Manual

Default:
13312 bytes
Usage Guide:
To configure jumbo frame size for ports.
Example:
To configure jumbo frame size (2000 bytes) for ge4
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # jumbo-frame 2000

4.3.5.9 ip arp inspection check-vlan

Command:
ip arp inspection check-vlan
arp Address Resolution Protocol
inspection ARP inspection
check-vlan ARP inspection VLAN mode config
Default:
Disable
Usage Guide:
To configure Check-VLAN mode into ARP inspection for specific interface
Example:
To configure Check-VLAN mode (Enabled) into ARP inspection for ge4
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-ge4) # ip arp inspection check-vlan

4.3.5.10 ip arp inspection logging

Command:
ip arp inspection logging all | deny | permit
arp Address Resolution Protocol
inspection ARP inspection
-26-
Command Guide