Storm Control; Global Setting - Planet Networking & Communication WGS-4215-8P2S User Manual

4.9.12 Storm Control

Storm control for the switch is configured on this Page.
There is an unknown unicast storm rate control, unknown multicast storm rate control, and a broadcast storm rate control.
These only affect flooded frames, i.e. frames with a (VLAN ID, DMAC) pair not present on the MAC Address table.

4.9.12.1 Global Setting

The Storm Control Global Setting and Information screens in
The page includes the following fields:
Object
 Unit
 Preamble & IFG
Buttons
: Click to apply changes.
The page includes the following fields:
Object
 Unit
 Preamble & IFG
Figure 4-9-68 Storm Control Global Setting Page Screenshot
Description
Controls the unit of measure for the storm control rate as "pps" or "bps". The
default value is "bps".
Set the excluded or included interframe gap
Figure 4-9-69 Storm Control Global Information Page Screenshot
Description
Display the current unit
Display the current preamble & IFG
User's Manual of WGS Managed Series
Figure 4-9-68 & Figure 4-9-69
272
appear.