Table of Contents
Advertisement
4.7 Maintenance
4.7.1 Switch Maintenance
This chapter is teaching how to upgrade the firmware, how to save the switch running configure and how to download/upload
the configure file and etc.
4.7.1.1 Web Firmware Upgrade
This page facilitates an update of the firmware controlling the switch. The Web Firmware Upgrade screen in
appears.
To open Firmware Upgrade screen, perform the following:
1.
Click Maintenance -> Web Firmware Upgrade.
2.
The Firmware Upgrade screen is displayed as in
Click the "
3.
Select on the firmware and then click "
4.
5.
Once the software is loaded to the system successfully, the following screen appears. The system will load the new
software after reboot.
Figure 4-7-1-1: Web Firmware Upgrade Page Screenshot
Figure 4-7-1-1
"button of the Main page; the system would pop up the file selection menu to choose firmware.
". The Software Upload Progress would show the file with upload status.
Figure 4-7-1-2: Software Successfully Loaded Notice Screen
User's Manual of IGS-6325 series
358
Figure 4-7-1-1
Advertisement
Table of Contents
