Motorola MVME2600 Series Reference Manual page 98

MATOM MPC Address Bus Time-out Machine Check Enable.
When this bit is set, the MATO bit in the MERST register
will be used to assert the MCHK output to the current
address bus master. When this bit is clear, MCHK will not
be asserted.
PERRM PCI Parity Error Machine Check Enable. When this
bit is set, the PERR bit in the MERST register will be used
to assert the MCHK output to bus master 0. When this bit
is clear, MCHK will not be asserted.
SERRM PCI System Error Machine Check Enable. When this
bit is set, the SERR bit in the MERST register will be used
to assert the MCHK output to bus master 0. When this bit
is clear, MCHK will not be asserted.
SMAM PCI Signalled Master Abort Machine Check Enable.
When this bit is set, the SMA bit in the MERST register
will be used to assert the MCHK output to the bus master
which initiated the transaction. When this bit is clear,
MCHK will not be asserted.
RTAM PCI Master Received Target Abort Machine Check
Enable.When this bit is set, the RTA bit in the MERST
register will be used to assert the MCHK output to the bus
master which initiated the transaction. When this bit is
clear, MCHK will not be asserted.
MATOI MPC Address Bus Time-out Interrupt Enable.When
this bit is set, the MATO bit in the MERST register will be
used to assert an interrupt through the MPIC interrupt
controller. When this bit is clear, no interrupt will be
asserted.
PERRI PCI Parity Error Interrupt Enable.When this bit is set,
the PERR bit in the MERST register will be used to assert
an interrupt through the MPIC interrupt controller. When
this bit is clear, no interrupt will be asserted.
Registers
2
2-31