SIP User's Manual
3.3.2.3
Configuring the RTP/RTCP Settings
The 'RTP/RTCP Settings' page allows you to configure the Real-Time Transport Protocol
(RTP) and Real-Time Transport (RTP) Control Protocol (RTCP) parameters. For a detailed
description of the parameters appearing on this page, refer to ''Configuration Parameters
Reference'' on page 223.
To configure the RTP/RTCP parameters:
1.
Open the 'RTP/RTCP Settings' page (Configuration tab > Media Settings menu >
RTP / RTCP Settings
2.
Configure the parameters as required.
3.
Click the Submit
4.
To save the changes to flash memory, refer to ''
Version 5.8
page item).
Figure 3-42: RTP/RTCP Settings Page
button to save your changes.
69
3. Web-Based Management
Saving Configuration''
on page
173
.
October 2009