Sip Software Package; Table 13-1: Software Package - AudioCodes Mediant 2000 User Manual

SIP User's Manual
13

SIP Software Package

The table below lists the device's standard SIP software package.
File Name
Firmware (RAM CMP) File
Mediant_SIP_xxx.cmp
ini Configuration Files
Mediant_SIP_T1.ini
Mediant_SIP_E1.ini
Usa_tones_xx.dat
Usa_tones_xx.ini
voice_prompts.dat
Utilities
DConvert
ACSyslog
BootP
CAS Protocol Files
MIB Files
CAS Capture Tool
ISDN Capture Tool
Notes:
Version 5.8

Table 13-1: Software Package

Image file containing the software for the Mediant 2000 and TP-1610
devices.
Sample ini file for Mediant 2000 / TP-1610 E1 devices.
Sample ini file for Mediant 2000 / TP-1610 T1 devices.
Default loadable Call Progress Tones *.dat file
Call Progress Tones ini file (used to create *.dat file)
Sample loadable Voice Prompts dat file
TrunkPack Downloadable Conversion Utility - to create Call Progress
Tones, Voice Prompts, and CAS
Syslog server
BootP/TFTP configuration utility
Used for various signaling types, such as E_M_WinkTable.dat
MIB library for SNMP browser
Utility that is used to convert CAS traces to textual form
Utility that is used to convert ISDN traces to textual form
•
The ini and Utility files are shipped with the device in CD format.
•
The device is supplied with a cmp file pre-installed on its flash memory.
Therefore, this file is not included on the supplied CD. However, if you
are an AudioCodes registered customer, you can obtain the latest cmp
version files (as well as documentation and other software such as the ini
and MIB files, and Utilities) from AudioCodes Web site at
www.audiocodes.com/support
at this Web site). If you are not a direct customer of AudioCodes, please
contact the AudioCodes' Distributor and Reseller from whom this product
was purchased.
Description
files
(customer registration is performed online
489
13. SIP Software Package
October 2009