Accessing A Scenario; Figure 3-16: Scenario Loading Message Box; Figure 3-17: Scenario Example - AudioCodes Mediant 2000 User Manual

3.1.8.2

Accessing a Scenario

Once you have created the Scenario, you can access it at anytime by following the
procedure below:

To access the Scenario:
1. On the Navigation bar, select the Scenario
you to confirm the loading of the Scenario.
2. Click OK
example figure below:
When you select a Scenario Step, the corresponding page is displayed in the Work pane. In
each page, the available parameters are indicated by a dark-blue background; the
unavailable parameters are indicated by a gray or light-blue background.
To navigate between Scenario Steps, you can perform one of the following:

In the Navigation tree, click the required Scenario Step.
SIP User's Manual

Figure 3-16: Scenario Loading Message Box

; the Scenario and its Steps appear in the Navigation tree, as shown in the

Figure 3-17: Scenario Example

tab; a message box appears, requesting
40
Mediant 2000
Document #: LTRT-68809